Hi,Welcome to Rvton!
0086 157 1723 7241
sealgroup04@rvton.com
Promote sales
大banner
钢片
机械banner
FLOATING SEALS BANNER
XY
普通
产品banner
L
Home > News > Products News > Causes of O-ring damage
Browse Categories
Floating seals for construction machinery(338)
Floating seals for Agriculture Farm machinery(107)
Floating seals for mining machinery(96)
duo cone seals(520)
Kom Seal groups(431)
GZ mechanical face seals(172)
Toric seals(112)
floating oil seals(224)
heavy duty seals(384)
OEM Design Floating Seals(236)
Contact us
Factory Add. : Luoqiao Industrial Zone, Lingxiang Town, Huangshi, Hubei, China Office : 1004, Block 5, Yijing Square, No.3 Tianjin Road , Hua...
Contact Now
Certifications
Popular products
Contact us
Factory Add. : Luoqiao Industrial Zone, Lingxiang Town, Huangshi, Hubei, China Office : 1004, Block 5, Yijing Square, No.3 Tianjin Road , Hua...Contact Now

News

Causes of O-ring damage

  • Author:Alice
  • Release on:2020-05-09
1. The friction between the seal and the metal surface causes the seal to wear.
Contaminants in oil (especially metal particles). Factors such as too high roughness on the metal surface and too tightly packed. The friction between the seal and the metal surface causes the seal to wear. Contaminants in oil (especially metal particles). Factors such as excessively high roughness on the metal surface and too tightly packed accelerate this wear.


2. Squeeze deformation
The seal liquefies under high pressure and enters the gap of the sealing surface. The relative movement between the seal and the seal groove will facilitate this process. The squeezing of the gap causes the seal to be completely damaged, the surface is torn or broken, and plastic deformation may occur. Add sealing ring to avoid extrusion.